Facing pool leak issues but confused from where it is leaking? No worries, in our guide, we will explain the simplest ways on how to detect a leak in your pool. However, you cannot fix the pool without noticing the leakage spot.
Furthermore, the pool leaks are difficult to detect because they can happen from the outer and inner sides.
Significantly, the pool leak issues can be detected by the ten simple strategies that we’ll discuss below:
How To Detect A Leak In Your Pool From Outer Or Inner Side?
1. Pool Leaks Due to the Equipment On
When the pool leaks due to the equipment on, you will see that pump is under pressure. Moreover, there will be small drips in the gusher’s sprays. Besides that, you must check the backwash line to check the water line is continuously running or not.
In addition to this, the pool should fill up to 500 gallons of water. You need to check that there are any wet spots in the yard or not? For instance, you will have an idea that water pressure is returning backward if the pool leakage is due to equipment on.
2. Pool Leaks Due to the Equipment Off
If the pool leaks when the equipment is off, there is leakage on the suction side. The leakage will be happening due to the filter pump, or vacuum is leaking.
Likewise, you can see that pool leakage is happening due to the air bubbling in the filter tank or pumping basket. Furthermore, if the pool leakage is happening with the off equipment, that air will be filled in the tank.
3. Pool Leaks All The Time
If the pool leaks all the time, it means there is some issue with the outside edge. Besides that, there will be some holes on the outer edge. To detect the pool leakage from the outer side, keep an eye on the pool for a few minutes. For instance, you can check the tile line. Also, check the inside line of the skimmers to detect the pool leakage.
On the other side, the pool leakage usually happens between the concrete pool and skimmer aren’t fixed properly. Moreover, you should look for the cracks near the pump. So it is better if you shut off the pump and then check for the cracks.
On the other side, you can check for leakage near the pool lights. You can put the butyl tape for fixing the pool leakage near the lights.
4. Leakage Happening Due To The Equipment Pad
If the leakage is happening due to the equipment pad, you need to look at the filter, valves, and heater. Besides that, there should not be any moisture on the ground when you inspect the pool leakage.
For that reason, you have to turn on the pump. In addition to this, you must look at the drip. There should not be any hole in that area.
5. Water Stabilizes At A Particular Level
Is the water stabilizing at a particular level? There might be some dust or debris stuck in the void.
6. Pool Is Leaking Or Just The Area Around Pool Is Wet?
You can walk around the pool to check which area is leaking or wet. For instance, you can prevent leakage on the soil. Also, walk towards the area to find the right spot from where the pool is leaking. Sometimes the pool might not be leaking. It could be just moisture around the pool.
7. Do The Bucket Pool Leaking Test
Bucket pool leaking test is quite a famous way on how to detect a leak in your pool. For instance, you can check if the pool is leaking or not? Place a bucket with a similar water level that is in the pool. If the water level is less than the bucket, there is a leakage in the pool.
8. Pool Leakage Due To Ripped Pool Deck
Most of the pool owners feel that the pool leakage is happening due to underground plumbing. But that’s not the case pool could be leaking due to a ripped pool deck. On the other hand, you can shut off the plugs and check if the leakage is still happening or not?
Similarly, you can try the pressure plumbing test on the pool’s deck and pipes to determine the leakage spot. You can repair the pool deck easily.
9. Cracked Pool
The concrete pool will not leak if there are small cracks. Moreover, the pools usually have small cracks, but that is not the cause of leakage. The pool will only leak if the concrete surface has large cracks on it. The deeper cracks will be the reason for leakage.
Yet, you can easily fill the pool cracks with the plaster mix. In addition to this, if the pool cracks are on the walls, it needs a stronger plaster mix and silicone? On the other side, you can put two layers of the plaster if the cracks are larger.
10. Pool Leaking Skimmers
Last but not least, our guide on detecting a leak in your pool is by the leaking skimmer detection. You can check the throat of the skimmer if there is any leakage on it or not. On the other side, you can check the pool leak detection dye.
For instance, the pool leaking skimmers on the walls and surface can be easily fixed with the pool putty. On the other side, you can permanently fix the pool leakage with the EZ patch 1. Besides that, if you want to fix the pool leakage quickly, then use the pool putty.
On the other hand, you have to replace the skimmer gaskets to fix the pool leakage.
We hope all these strategies will help you on how to detect a leak in your pool. Besides that, there are swimming pool leakage detection company that can help you out!
Also Read: How To Repair Plaster In A Pool
Leave a Reply