The swimming pool in your home backyard also needs time to time maintenance to give you clean and sparkling water. The floors and walls usually attract dust and debris, making the water unhealthy and unattractive to swim in. So, you need to invest in a pool vacuum for fast and useful swimming pool cleaning. Cleaning a pool is not complicated with a vacuum; you only need to move it around, and the vacuum will do its suction, cleaning, and polishing job. Besides, you must know how to assemble it and use it properly to get the most out of it. Let’s get into detail on the guide to using a pool vacuum.
There are two different types of pool vacuums available, the manual one, and the automatic one. The manual pool vacuum is better and gives you professional results in no time. It is a user-friendly and affordable product that assures removing every dust particle and stubborn algae from the swimming pools’ walls and floor.
Apart from a time-saving cleaning technique, you should also make sure to have all the essential tools before vacuuming your pool. Here are a few of the essentials that you are going to need while operating a pool vacuum.
Must-Have before Cleaning
- Vacuum head and a telescopic pole: If you use a swimming pool for a while now, you must have a telescopic pole. We are also hoping that you even got your hands on interchangeable nets, brushes, and skimmers. Usually, most of the best pool vacuums can be work with any telescopic pole. Still, you can check the type beforehand and buy the vacuum accordingly.
- Vacuum hose: It is an essential tool that connects your vacuum head to the pool pump with the help of a skimmer inlet. It offers the power for debris suction.
- Vacuum plate: Another vital tool to have is a vacuum plate known as a skimmer plate. It helps you to connect the hose to the skimmer inlet.
- Scrub Brush: It will help you in scrubbing the entire pool and making it new as before.
After getting all the necessary equipment pieces, it is time to assemble a pool vacuum and start the cleaning session. Besides, here is a step by step instruction guide that you should learn beforehand.
How to Use Pool Vacuum- Steps
Follow the steps and instructions below to manually clean your in-ground and above-ground pool without any professional assistance and save thousands for your next shopping spree.
Assemble the Pool Vacuum
The very step you need to do is assembling. Attach the head of the vacuum to the one end of the telescopic pole. It helps you to move the vacuum head at the bottom of the pool.
It is the easiest step. Attach the one end of the vacuum hose to the vacuum head and let the other end outside the pool. Locate the skimmer and connect the other end of the hose to the skimmer using a vacuum/skimmer plate.
Priming the Vacuum
After attaching all the necessary equipment, it is time to prime your vacuum. Priming is all about pushing water through the hose dispel all the air. It is vital to do because air pockets may restrict your vacuum suction power, and all your effort may go in vain.
Make the valve setting
You can choose the valve setting from different options. First, learn how much cleaning your pool needs. For the regular light or moderate level vacuuming, you can set the valve to “filter.” If large stubborn debris and algae make their home in your pool, then you should set your system to “waste” or “drain”; it will send the water down the drain and remove trash out of it.
Start Vacuuming the pool
Treat your pool vacuum as your regular rug vacuums. Move it around the pool floor slowly and steadily, and try not to rush. If it is your regular cleaning, then you may not have to make an extra effort. But, if the pool is pretty much dirty, you may have to take little breaks to empty the pump strainer. Repeat the same process until you feel like your pool is clean and free of all the debris.
Disconnect and final touch-ups
When your cleaning process is done, and you feel your swimming pool all-new, it is time to disconnect the vacuum head, hose, and all the other parts that you have assembled. Do not forget to clear out the skimmer from the bottom. Besides, if you made changes to the vacuum filter settings, change it back to the default.
For your mind satisfaction, give your pool a quick final cleaning touch-up. Attach a scrub brush to the telescopic pole and give the floor and walls a relaxed scrubbing.
- How often should I clean my pool?
Well, you should give a cleaning touch-up to your pool once a week to have sparkling water. Also, whenever you see a large amount of debris, leaves, and algae on the floor or walls, you should not procrastinate the cleaning.
- Can I vacuum my pool in a “waste” setting?
That option gives no harm to your pool, but it is better to know how much cleaning your pool neds. If you are doing regular cleaning, you may not experience many debris and other trash particles. So, you can leave the setting to “filter.” Whereas, if you can see leaves, stubborn algae, it will be a stringent cleaning, and the “waste” setting option can do the job.
A swimming pool can be your biggest asset when you crave water jumps in the mid of summer. However, the asset also demands maintenance for its longevity and better performance. If you invest in the best swimming pool, you should also get your hands on the vacuum to make sure it’s cleaning for healthy and sparkling water. Also, learn how to use a pool vacuum to maintain your pool all the time and save yourself a few bucks.
Also Read: Installing A Round Above Ground Pool