Getting the above ground pool and setting it in your background is an incredible idea. However, your next concern should be its maintenance after getting your hands on the best above ground pool in the market. To adventure in crystal clear water, it is vital to keep it away from dirt and debris, especially when you plan to spend all day swimming, jumping, and enjoying. And, If you were keen enough to set up the pool by yourself, you would definitely enjoy the cleaning process.
Now the question is, how to vacuum above ground pool without wasting time and how to get the cleaning job done efficiently.
Let’s discuss the cleaning and vacuuming aspect of the above ground pool vacuums in detail.
You will see two types of above ground pool vacuums in the market; manual and automatic. Most people prefer the manual one as it assures professional cleaning and removes all the debris, dirt, and stubborn algae on the floor and corners in less time. Also, it is easily usable and affordable to get. So if you enjoy cleaning, it should be fun. Simultaneously, the automatic pool vacuum is quite costly and would not satisfy your cleaning needs.
Moreover, let’s stop fantasizing about its perks and techniques; we shall focus on essential tools that we might need during the cleaning process.
Must-Have Pool Vacuuming Tools
The primary tool to clean the above ground pool is Vacuum. Yes, it’s obvious. But you’re also going to need some other things to help yourself.
These are the things that you will require with both manual and automatic vacuums.
- Pool Skimmer: It will help you remove the large debris pieces before you start vacuuming the pool.
- Telescopic pole: We hope you have a telescopic pole beforehand if you’re using the pool for a while.
- Scrubbing tools: It’s better to get interchangeable nets and scrub brushes for deep cleaning.
- Vacuum hose: It helps for debris suction. With the help of a skimmer inlet, you can connect the vacuum head and pool pump.
- Vacuum/Skimmer plate: You will need it to connect the hose and skimmer inlet.
Assemble the Vacuum
To vacuum the above ground pool, you need to assemble the Vacuum and get it ready to start the process. Assembling is a pretty simple yet exciting part of the process that doesn’t require rocket science. You just need to follow a few simple steps and boom. It is ready to work!
- Organize the Vacuum
The very first step of assembling the Vacuum is connecting the one end of the telescopic pole to the head of the Vacuum. It allows you to move the Vacuum more conveniently at the bottom of the pool.
- Vacuum Hose
Your next step should be attaching the vacuum head to the one end of the vacuum hose. It is the easy part but requires your attention. Besides, remember to keep the other part of the hose outside the pool and connect it to the skimmer using a vacuum/skimmer plate after priming.
- Prepare your Vacuum
After attaching all the parts, you can use your Vacuum once you prime it. Rehearsing makes it ready to perform its job well and give you an idea of dos and don’ts.
So, once you put the vacuum head into the pool, you want to affix one end of the hose to the pool’s water intake. You do it to disperse the air because it can restrain the suction power of your Vacuum.
- Vacuuming options
Your Vacuum lets you make the valve setting according to your vacuum cleaning needs. You can change its cleaning mode from” Filter,” which is for regular use, to” waste,” that is primarily for the days when the storm hits your town, and your pool is full of debris and dirt. Besides, remove the stubborn algae who got to make its room in your cute pool, keep the” waste” or” drain” valve option, and Vacuum carefully.
The assembling and attaching vacuum part is done here. Now you can start vacuuming your above ground pool and give it a makeover that you always want. Crystal clear, clean, sparkling water.
Vacuum Above Ground Pool
If you’re using a manual pool vacuum, you need to get a skimmer and remove all the debris from the pool’s surface. Trust me; in the era of advanced technology where a handy device can perform this job in minutes, using your hands is still a better and cost-effective door.
After removing the debris, you are all set to get your Vacuum in the pool. You need to move the Vacuum slowly and steady and clean the bottom with patience. Do not go too quickly and do not pressure. It can make up the gushes of debris that the vac fails to pick up. So, be careful, or your hard work can go in vain.
If your pool is not much dirty, you don’t have to make an extra effort. If you do it in the right way, it shouldn’t take more than a few hours. However, if you’re cleaning it after ages, then you may have to tale little breaks in between and empty the pump strainer so you would have a better result. Repeat the same cycle until you think the mission is accomplished and your pool is clean!
Finally, when you complete the cleaning process, you should disconnect the vacuum parts and change the valve setting to default. Remember taking care of the Vacuum is as vital as maintaining your above ground pool, and your little attention can make it durable and worth performing.
Do we need to vacuum our above ground pool?
Sure we do. But the good news is, it doesn’t require high maintenance as compared to the in-ground pools. But to keep the water clean and algae free, it is recommended to vacuum your above ground pool more often.
Do automatic pool vacuums are better than manual ones?
Automatic vacuums are expensive and often don’t work as the manual. But if you’re looking for a time-saving device that can do the job for you, then you can consider buying it.
Don’t worry if it takes time and effort for the first time. You’ll eventually learn how to vacuum above ground pool professionally and feel proud of yourself for all the hard work and saving dollars! Just don’t give up.
Also Read: Best Above Ground Pool Brands
Leave a Reply